How does Wyoming electrician licensing work?
Wyoming electrical licensing runs through the State Fire Marshal electrical-safety program and has two tracks. The full-scope individual ladder moves from apprentice to journeyman to master, while a company that contracts full-scope electrical work follows the electrical contractor license path. Wyoming also has an active specialty track for low-voltage/limited apprentice technicians, low-voltage/limited technicians, and low-voltage/limited contractors. The official licensing page lists both tracks.
The specialty track is category-specific. Low-voltage technician categories cover listed alarm, communications, sound, television/satellite, controls, and lawn-sprinkler work under 90 volts, plus the LV-G all-category license. Limited technician categories cover listed elevator, sign, water-well/irrigation, lighting-maintenance, and HVAC work within the page’s stated load-side or maintenance limits. Businesses use a separate low-voltage/limited contractor license and technician-of-record structure.
The State of Wyoming currently lists the 2026 National Electrical Code among its adopted codes. See the adopted-code page. That code edition matters when choosing exam references and code-update education.
Full-scope and low-voltage/limited license paths
Full-scope electrical licenses
| Credential | Holder | Planning role |
|---|---|---|
| Apprentice electrician | Individual | Builds supervised on-the-job experience and classroom education |
| Journeyman electrician | Individual | First full-scope electrician license after the experience, education, and exam gates |
| Master electrician | Individual | Senior full-scope credential built on total experience and licensed journeyman time |
| Electrical contractor license | Business | Company credential tied to a full-time Wyoming master of record |
Low-voltage and limited licenses
| Credential | Holder | Basic scope or business role |
|---|---|---|
| Low-voltage/limited apprentice technician | Individual | Supervised entry path for the applicable specialty category |
| Low-voltage technician | Individual | Category license for listed work under 90 volts: all-category, alarm, communications, sound, television/satellite, controls, or lawn sprinklers |
| Limited technician | Individual | Category license for listed elevator, sign, water-well/irrigation, lighting-maintenance, or HVAC electrical work within the stated limits |
| Low-voltage/limited contractor | Business | Specialty company credential tied to a full-time Wyoming-licensed technician, journeyman, or master as technician of record |
The licensing page says technician licensing can only be obtained through examination. It also says a low-voltage/limited contractor must employ the qualifying technician of record full time, and that person can serve as technician of record for only one company. Use the State Fire Marshal’s current category, experience, and application instructions rather than applying the full-scope journeyman requirements to a specialty category.
Keep personal and company records separate in either track. The person qualifies; the business contracts. The broader electrician licensing guide explains the general ladder.
What does the standard journeyman route require?
For an applicant to take the Wyoming Journeyman electrician’s exam, the applicant must present evidence of 4 years (8,000 hours) of work experience in the electrical wiring industry and 144 hours per year, or 576 hours over a four year apprenticeship, of successfully completed electrically related classroom instruction obtained through a Department of Labor approved electrical apprenticeship training program. That is the state licensing-page wording.
Four years and 8,000 hours describe the same work requirement, not alternatives. Keep annual employer records, supervisor license details, total hours, work-category breakdowns, and classroom documents together.
The standard master route and classroom-hour alternative
The standard master-exam route requires eight years (16,000 hours) of electrical-wiring experience, including four years (8,000 hours) documented as a licensed journeyman, plus 576 hours of electrically related classroom instruction. The state lists the standard route on its licensing page.
If the applicant cannot provide 576 classroom hours, the licensing page allows an alternative: evidence of 10 years and 20,000 hours of on-the-job training as a licensed journeyman or master electrician, subject to approval by the Chief Electrical Inspector. See the education-exemption language. This is an approval path, not an automatic substitution, so document the licensed status and hours before relying on it.
How the electrical contractor license works
Electrical Contractors must actively employ in a full-time capacity a Wyoming licensed master electrician who will serve as the master of record. Wyoming states that requirement on the licensing page.
That is a staffing dependency, not just a filing task. Identify the master of record before the company applies and plan for succession. For non-electrical contracting questions, use the separate Wyoming contractor license guide.
A practical application sequence
- Register the individual path. Start the apprentice process through the state portal.
- Log work by year and category. Keep notarized employer records and supervisor details.
- Preserve classroom evidence. Save approved apprenticeship records with the work file.
- Apply for the correct exam. Submit the evidence for journeyman or master review.
- Document an alternative master path completely. If classroom hours are unavailable, do not assume qualification; build the 10-year, 20,000-hour licensed-experience file for Chief Electrical Inspector review.
- Separate the company filing. Complete the contractor-license path and identify the full-time master of record.
- Calendar renewal. Track education, renewal windows, and late-renewal consequences.
Renewal and continuing education
The Wyoming licensing page says journeyman electricians need 16 hours of continuing education in a three-year period, with eight of the 16 hours from a code-related course. See the renewal instructions. Finish the hours before the application opens and retain the certificates.
Reciprocity waives an exam, not Wyoming licensure
Reciprocity exempts you from the exam, not the remaining Wyoming licensure requirements. Wyoming makes that distinction on its licensing page. Use the live partner list and receiving-state instructions before scheduling work. The contractor license reciprocity guide explains why an exam waiver is not authority to contract.
Wyoming electrician license questions
How much experience does the standard journeyman route require? Four years (8,000 hours), plus the required classroom instruction.
What is the standard master route? Eight years (16,000 hours), including four years (8,000 hours) as a licensed journeyman, plus 576 classroom hours.
Is there an alternative if a master applicant cannot provide 576 classroom hours? The state allows Chief Electrical Inspector approval when the applicant documents 10 years and 20,000 hours of on-the-job training as a licensed journeyman or master electrician.
Can a journeyman qualify an electrical contractor business? The state requires a full-time Wyoming licensed master electrician as master of record.
Does reciprocity create a Wyoming license automatically? No. It is an exam exemption, not an exemption from licensure requirements.
Does Wyoming have low-voltage and limited electrical licenses? Yes. The State Fire Marshal lists low-voltage/limited apprentice technician, category technician, and contractor paths; the contractor uses a full-time Wyoming-licensed technician, journeyman, or master as technician of record. (official licensing page)